Environmental Testing
Environmental Test Laboratory was established in 1996, the intention of the Lab is to provide the testing service of reliability, safety, and durability under different environmental condition for industries. The services include electrical, mechanical, climatic and chemical related fields, can also suitable for the product of electronic, aerospace, ect.
- Contact
- Name：Zeng,You-Yan
- TEL：04-7811222 ext. 2452
- E-mail：richard@artc.org.tw
Certification & Accreditation
TAF (Accreditation Number：1035), IDIADA, Harley-Davidson, AMECA, Ministry of Transportation and Communications R.O.C., Bureau of Standards, Metrology & Inspection, M.O.E.A.
Services
Facilities
| Output Voltage | DC 0~1,200V |
| Output Current | 100A |
| Load Unit Used for Passenger Car | Load Unit Used for High Power Vehicles | Load Unit Combine with Environmental Chamber | |
| Rated Power | 178 kW(Rated Power) | 250 kW(Rated Power)
| -- |
| Max. Speed | 16,000 rpm | 7,500 rpm | -- |
| Temperature Range | -- | -- | -40 ℃ ~ 120 ℃ |
| Humidity Range | -- | -- | 50 %RH ～ 95 %RH |
| Output Force | 4400 lbf |
| Temperature Range | -40 ℃ ~ 120 ℃ |
| Humidity Range | 40 %RH ～ 95 %RH |
| Max. Acceleration | 100 g / 2000 g (Second shock) |
| Test plane | 150 cm × 150 cm |
| Max. Load | 200 kg |
| Temperature Range | -40 ℃ ~ 60 ℃ |
| Temperature Range | -40 ℃ ~ 120 ℃ |
| Humidity Range | 40 %RH ～ 95 %RH |
| IP Code IP5X ~ IP6X |
| IP Code IPX1 ~ IPX9 |
| Light source | Xenon arc / Metal halid lamp type HMI |
| Temperature Range | 35 ℃ ～ 60 ℃ |
| Humidity Range | 30 %RH ～ 95 %RH |
| Temperature Range | -50℃ ~ 100℃ |
| Pressure Range | 200 mbar ~ 1 bar |
| 2800L | |
| Temperature Range | -65 ℃ ～ 200 ℃ |
| Temperature Range | -70 ℃ ~ 180 ℃ |
| Humidity Range | 20 %RH ～ 95 %RH |
| Temperature rate of change | 10 ℃ / min or more |
| Test Gases | SO2、H2S、NO2、Cl2 |
| Voltage Range | 40 Vd.c.～ 600 Vd.c. |
| Current Range | 1 A～ 100 A |
| Temperature Range | 0 ℃ ~ +60 ℃ |
| Humidity Range | 30 %RH ~ 95 %RH |
| Temperature Range | -60 ℃ ~ +150 ℃ | ||
| Humidity Range | 20 %RH ~ 95 %RH |
To verify that the functions of automotive E/E device is capable of withstanding the various battery supply voltage.
To verify that the component/product is capable of withstanding the effects of accumulation of fine dust or sand environment, this test can cause locked of moving component (ex. Bearing, Motor) or abrasion (ex. Optical device) or change of the electrical character (ex. Electric resistance).
To verify that the component/product is capable of withstanding the effects of rain or water spray environment, this test can cause short circuit or corrosion of PCB.
To verify that the component/product is capable of withstanding the effects of the solar radiation with rain or temperature and humidity environment, this test can cause discoloration, peeling and cracking of plastic material.
Screening failure by different vibration mode.
E-motor load unit combine environmental stress test.
Evaluate reliability with temperature change
To simulate low pressure, high altitude environment.
Apply environmental stress to evaluate product.
Verified the ability of corrosion resistance.
Evaluate product under corrosive environment.
Evaluate product for malfunctions and breakage caused by shock.
This device can provide electric-vehicle and electrical/electronic systems and related components anti-corrosion environment simulation.