2010
Technology Transfer
Image-Based Obstacles Detection System
Imaged assist technology
This technology uses image processing method that utilizes back-draft camera to detect the obstacles that collides with our vehicle possibly when reversing the vehicle. It uses only single back-draft camera to detect the obstacles.
1 Video output frequency: 10 frames / s or more. (2) Embedded hardware circuits: DSP systems; Operation frequency: 600MHz. 3 Interface: CAN BUS (speed, direction lights), NTSC or PAL (camera), GPIO (buzzer). 4. Detection Area: 3mx3m ,behind the vehicle. 5 Detected objects: all kinds of vehicles and pedestrians. 6 Operation temperature: -40 ℃ ~ 85 ℃. 7 Operation current: CCD (12V, 120mA the following), ECU (12V, 300mA). 8 Warming method: obstacles warning (effect distance: 1m ~ 3m); buzzer and LED (within 1m).
This technology is mainly applied to detect obstacles and warms the driver when reversing the vehicle. It can be set on other locations to detect the approaching obstacles.
This technology that can replace ultrasonic detection and mark the obstacles location on the screen and can be set on existing back-draft camera or assistance system. This system provides to reverse vehicle more safety and convenient.
