Sensor fusion detection technology is used to sense the surrounding environment with sensors for the autonomous vehicles. However, only sensor data is not enough for the autonomous vehicles to operate, and it needs to be multiple sensor fusion detection technology. Due to the limitation of single sensor's environmental sensing, it is necessary to equip multiple sensors to collect the information of the surrounding environment, so that the autonomous vehicles can have enough information for judgment. This technology focuses on the hardware and software integration and deployment of sensors, and uses multiple sensors for fusion. In addition to the information provided by a single sensor, it is necessary to refer to the information of other sensors for integration, and then track the obstacles within the range of interest of its sensing, and output the coordinates and related physical parameters of multiple obstacles.

1.Input voltage range: 24V, 280W 

2.Temperature range for operation: -40 ~ 85°C 

3.Operation environment: both daytime and nighttime

4.Interface: GMSL/Ethernet/CAN 

5.Sensor Specifications: Camera(720P) /Radar(77G Hz)/ LiDAR(32Layer) 

6.Detection Range: 100m front / 20m side/ 50m behind

This technology can be applied to Level 2~Level 4 self-driving cars, with sensor module synchronization and integration technology.

The technology can make domestic braking component manufacturers have capabilities of system integration, and master the key technologies of synchronous integration modules, meeting the system requirements of Level 2~Level 4 autonomous vehicles.