Component Testing
Component Testing Lab, carries out performance and durability tests of vehicle components, including vehicle wheels, safety belts, child restraint systems and flammbility of interior materials. It is accredited by BSMI, (Bureau of Standards, Metrology and Inspection), for alloy wheels and child restraint systems, VSCC (Vehicle Safety Certification Center) ,for safety belts and flammbility of interior materials. The lab also cooperate with IDIADA of Spain,IQA of Brazil , AMECA of U.S.A. and TÜV SÜD of Czech for component certification test,such as wheel,child restraint system and safety belt. Besides, the lab has abundant testing experience and cooperates with CAE to provide comprehensive analysis and improvement service of above products.
- Contact
- Name：Chan-Neng Lin
- TEL：ext.7226
- E-mail：cnlin@artc.org.tw
Services
Facilities
| Max. bending moment | 14.7 kN-m (1500 kgf-m) |
| Diameter | 10”～30” |
| Max. radial loading | 8,000 kgf |
| Wheel dimension | normal diameter 10"～30" |
| Mass of striker | 350~1,055 kg |
| Wheel dimension | normal diameter 10"～30" |
| Load cells capacities | 5,000kg&30,000kg |
| Speed of test | 1~70,000±500 N/sec |
| Maximum Loading | 330 mm |
| Max. Displacement | 50 rpm |
| Max. Frequency | 40 cycles/min |
| Standard pulling force loading | 9 kg |
| Webbing Max. width | 76 mm |
| Max acceleration | 3.5 g |
| Pull out of max distance | 70 mm |
| Stroke | 200 mm |
| Speed of test | 150 ±10 mm/sec |
| Rotate speed | 2~5°/sec |
| Rotate angle | 360° |
| Test gas | Natural gas.(Methane) |
| Sample size | 355 mm×100 mm |
| Test gas | Commercial propane gas |
| Sample size | 565mm × 170mm |
| Diameter of radiating surface | 100 mm |
| The radiated heat | 3 W/cm2 |
| Sample size | 140mm × 140m |
| Test liquid | Diesel fuel(according to CNS 1471、EN 590:1999) |
| Test gas | Natural gas.(Methane) |
| Flame temperature | 950 +/- 50℃ |
The purpose of the tests is to check the functions of fastening after required opening and closing cycles.
The purpose of the tests is to check the spoke and rim strength of wheel after required radial fatigue cycles.
The purpose of the tests is to check functions of buckle after required opening and closing cycles.
Retractor Emergency-locking Tester
The purpose of the tests is to check the impact resistance strength of wheels.
Conditioning test for adjusters mounted directly on a child restraint Testing Machine
The purpose of the tests is to check the spoke strength of wheel after required bending fatigue cycles.