Environmental Testing

Description

Environmental Testing Lab. was established in 1996, the intention of the lab. is to provide the testing service of reliability, safety, and durability under deferent environmental condition for industries. The services include electrical, mechanical, climatic and chemical related fields, can also suitable for the product of electronic, aerospace, ect.

Facilities

  • Automotive Power Simulation Equipment

    Output Voltage:DC 0 ~ 60 V
    Output Current:0 ~ 30 A
    Output Wave:Sine, Triangle, Square, Pulse
    Test Item:Power fail、Voltage drop、Cranking start、Reversed voltage、Over-voltage...

  • Temp. / Hum. / Load Unit Combine Chamber Used for E-motor

    (1)Load Unit Used for Passenger Car
    Rated Power:178 kW
    Max. Speed:16,000 rpm
    Rated Torque:420 N-m
    (2)Load Unit Used for High Power Vehicles
    Rated Power:250 kW
    Max. Speed:7,500 rpm
    Rated Torque:1,200 N-m
    Load Unit Combine Chamber
    Temperature Range:-40 ~ 150 ℃
    Humidity Range:10% ~ 95% RH

  • Temp. / Hum. / Vibration Combine Chamber

    Output Force:4400 lbf / 4000 lbf / 2000 lbf (Max.)
    Test Direction:Vertical, Horizontal(Sine / Random / Shock)
    Chamber Size:1.2 m × 1.2 m × 1.3 m
    Temperature Range:-60 ~ 150 ℃
    Humidity Range:10%RH ~ 98% RH

  • Temp. / Hum. / Vibration Combine Chamber

    Output Force:24,000 lb(Max.)
    Test Direction:Vertical, Horizontal(Sine / Random / Shock)
    Chamber Size:2.2 m×1.5 m×2.2 m(W× H× D)
    Temperature Range:-70 ~ 180 ℃
    Humidity Range:20%RH ~ 98% RH

  • Coolant Conditioning System

    Control Range:-60 ~ 150 ℃
    Cooling capacity:-40 ℃/7kW、-20 ℃/8.5kW、
    0 ℃/10.5kW、 20 ℃/15kW
    Heating capacity:5.3kW
    Max. Flow rate:45L/min
    Max. system pressure:2.9kg/cm2

  • Temp. / Hum. Chamber

    Temperature Range:-50 ~ 150 ℃
    Humidity Range:20% ~ 98% RH

  • Dust Test Chamber

    IP-code IP1X~6KX Talcum powder, Arizona Sand
    SAE Portland cement
    JIS Z8901 No.6 Portland cement, No.8 KANTO loam, No.15 Mixture

  • Splash Water Test Chamber

    IP-code IPX1~X9K
    Temperature Range:Room Temp. ~ 85℃(High Temp.-High pressure), 0℃ ~4℃(Ice Water Shock)
    Water Flow Rate:20 L/min(High Temp.-High pressure), 3 ~ 4 L/sec(Ice Water Shock)
    Water Pressure:10000 kPa(Max.)

  • Weather Ometer Chamber

    B.P.T range:38 ℃ ~ 100 ℃
    Humidity range:13%RH ~ 90%RH(without radiation)
    Light source:Xenon arc, Metal halid lamp type HMI

  • Salt Spray / Temp. / Hum. Combine Chamber

    Temp. Range:35 ~ 60 ℃
    Hum. Range:20 ~ 98% RH
    Consistency:variable
    Quantity of Spray:0.5 ~ 3 ml / 80 cm2/hr

  • Tire Pressure Monitoring System(TPMS)

    Rotational speed(Max.):4000 RPM (Max. 1600G)
    Temperature Range:Room Temp. ~ 65℃
    Max. pressure:1000 kPa
    Depressurization: < 1 sec

  • Gravel Bombardment Test Chamber

    Max. jet pressur:500 kPa
    Jet angle:54° / 90°
    Type of gravel:DIN 55996-1 Chilled Iron Grit (4 ~ 5 mm)、SAE J400 Michigan Worm River Gravel (9.5 ~ 15.9 mm)

  • Thermal Shock Test Equipment (120L)

    Temp. Range:-80 ~ 220 ℃
    Chamber Size:W 47 cm × H 41 cm × D 65 cm

  • Vacuum-Climate Chamber

    Temp. Range:-50℃ ~ 100 ℃
    Hum. Range:20 % RH~ 90% RH
    Chamber Size:W 75 cm × H 75 cm × D 75 cm
    Pressure Range:100 mbar ~ 1 bar

  • Thermal Shock Test Equipment

    Temp. Range:-70 ℃~ 180 ℃
    Chamber Size:W 100 cm × H 100 cm × D100 cm

  • Environment Stress Screening Chamber

    Temp. Range:-70℃ ~ 180 ℃
    Hum. Range:10 % RH~ 98% RH
    Chamber Size:W 110 cm × H 94 cm × D 130 cm
    Temperature rate of change:14.8 ℃ / min (+85℃ ~ -40℃)

  • Corrosion Test with Flow of Mixed Gas Chamber

    Temp. Range:-5℃ ~ 90 ℃
    Hum. Range:10 ~ 98% RH
    Test Gases:SO2、H2S、NO2、Cl2

 
  • Mechanical Shock Test Equipment

    Max. Acceleration:100 g / 2000 g(Second)
    Duration:6~15 ms / 0.5~1 ms
    Test plane:150 cm × 150 cm
    Max. Load:500 kg

  • Power Cycling and Test Systems

    Voltage Range:12 Vd.c.~600 Vd.c.
    Current Range:0A~500A
    Measurement Data:Voltage, Current, Temperature

  • Free Fall Test Equipment

    Test Height:30 cm~210 cm
    Max. Load:60Kg
    Arm Size:450mm×270mm

  • Vehicle Corrosion Test Chamber

    Chamber Size:4 m (W) × 6 m (D) × 3 m (H)
    Temp. Range:-20 ℃ ~ +60 ℃
    Hum. Range:30 %RH ~ 95 %RH
    Fog collection rate:1~ 4 ml/hr/80cm²

  • Controlled Temperature and Humidity Chamber For Lithium Battery Packs

    Temperature Range:-60 ~ 150 ℃
    Humidity Range:20% ~ 98% RH
    Temperature rate of change:8℃/min(-40 ℃ ~ 85 ℃)

Services

Electrical Load:

▪ Direct current supply voltage test
▪ Overvoltage test
▪ Superimposed alternating voltage test
▪ Slow decrease and increase of supply voltage test
▪ Discontinuities in supply voltage test
▪ Reversed voltage test
▪ Open circuit tests
▪ Charge-discharge simulation test
▪ Insulation resistance test
▪ Withstand voltage test
▪ Switched battery lines test
 

Mechanical Load:

▪ Sinusoidal vibration test
▪ Random vibration test
▪ Vibration with temperature cycle test
▪ Mechanical shock test
▪ Gravel bombardment test
▪ Free fall test
▪ Ball impact test
▪ Adherence of coating test
 

Climatic Load:

▪ Protection against dust and water (IP code)
▪ High-pressure / steam-jet cleaning test
▪ High/Low temperature test
▪ Salt spray test
▪ Cyclic corrosion test
▪ Temperature with humidity test
▪ Rapid change of temperature test
▪ Solar radiation test
▪ Thermal shock test
▪ Ice water shock test
▪ Frost test 
▪ Altitude test
▪ Environment stress screening test
▪ Corrosion test with flow of mixed gas test
 

Chemical Load:

▪ Chemical agents test

Certification & Accreditation

▪ TAF(Accreditation Number:1035)
▪ IDIADA
▪ Chrysler
▪ Harley-Davidson
▪ AMECA
▪ NSF
▪ MOTC, Ministry of Transportation and Communications R.O.C
▪ BSMI, Bureau of Standards, Metrology & Inspection, M.O.E.A.

Ability

▪ Vehicle Safety Inspection Standards Title of Item  202, 302, 322, 522, 591, 65
▪ CNS 13762、CNS14165...
▪ ISO 16750,ISO 20653...
▪ JASO D014, JASO D001-94...
▪ FMVSS 108 ...
▪ SAE J575, SAE J2657...
▪ IEC 60068-2、IEC 60529、LV124、ABNT NBR 6752、UNECE、GB...
▪ GMW 3172、MITSUBISHI、FORD...

 

Integrated Services

▪ Computer Aided Engineering (CAE) Center
▪ Fatigue and Durability Laboratory
▪ Automotive Noise Testing Laboratory
▪ Automotive Lighting Testing & Photometric Calibration Laboratory
▪ Electromagnetic Compatibility Laboratory

Future Development

1. The testing technique of anti-corrosion for vehicles:to develop whole vehicle anti-corrosion testing technology and anti-corrosion improvement technology.
2. The testing technique of EV power train:batteries, traction motors, motor control unit, chargers and other components or systems validation technology.

Contact Us

Zeng,You-Yan(#2452)richard@artc.org.tw